Hand lay-up craft materials--woven roving combination mat, fiberglass fiberglass

 Fiberglass complex matProduct DescriptionFiberglass complex mat is composed of woven roving and chopped strand, stitched by polyester yarn, it is widely used in pultrusion, RTM process and hand lay up.The min width is 20cm, the max width is 260cm.It widely produces FRP products like boat hull, truck bodies, pultrusion prof

Featured Products

Hand Lay-up Process Material--Woven Roving Combo Mat, Fiberglass for FRP
 
Fiberglass complex mat

Product Description
Fiberglass complex mat is composed of woven roving and chopped strand, stitched by polyester yarn, it is widely used in pultrusion, RTM process and hand lay up.

The min width is 20cm, the max width is 260cm.

It widely produces FRP products like boat hull, truck bodies, pultrusion profile, bus roofing and so on.


Properties:

Multi-layer finished one time,decrease layer and enhance efficiency.
Providing the product with multi-directional mechanical strength.

 
Packing &Storage:

Each roll covering by polyethylene plastic bag,then placed into carton,and set on pallet.
Each pallet stack 9 or 16 cartons.The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.
 

Technical Data:
 
TypeArea Weight(g/m2)Woven Roving/Chopped Strand(g/m2)Water Content(%)Wet Speed(<=S)Width(mm)
EMK400/300700400/300<=0.260200-2600
EMK500/300800500/300<=0.260200-2600
EMK500/450950500/450<=0.260200-2600
EMK600/300900600/300<=0.260200-2600
EMK600/4501050600/450<=0.260200-2600
EMK800/3001100800/300<=0.260200-2600
EMK800/4501250800/450<=0.260200-2600
Hand Lay-up Process Material--Woven Roving Combo Mat, Fiberglass for FRP

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours