FRP Fiberglass Surface Tissue Pad for Compression Molding Process

Fiberglass Continuous Filament Mat EMS335 of Nanjing Tianming:Basic Parameters: Model No.: EMS335Weight:1.1oz. per sq/ft or 335grams per sq/m ±8%Width:up to 102.36" or up to 2600mmNet Weight per roll:66lbs±1.1lbs or 30kg±0.5kgSize of the Inner Carton Tube:Length 51" * Diameter 3"

Featured Products

Fiberglass Continuous Filament Mat EMS335 of Nanjing Tianming:

Basic Parameters: 
Model No.: EMS335
Weight:1.1oz. per sq/ft or 335grams per sq/m ±8%
Width:up to 102.36" or up to 2600mm
Net Weight per roll:66lbs±1.1lbs or 30kg±0.5kg
Size of the Inner Carton Tube:Length 51" * Diameter 3" * Thickness 0.2"
or Length 1300mm * Diameter 76mm * Thickness 5mm

Technical Date: 
Loss on Ignition: 5%±1%
Moistrure: ≤0.2%
tension strength: Intensity in Horizontal ≥ 120N
Intensity in Vertical ≥ 120N

Qualified by the Third-part Test:
• The odour characteristics - RA
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu

• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
Or please tell me the application of your fiberglass chopped strand mat. Then  the one most suitable for you will be recommended.

FRP Glass Fiber Surfacing Tissue Mat for Compression Molding Process

Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.

Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

Fiberglass Continuous Filament Mat Series:
Model No.WeightWidthLoss on Ignition MoistrureNet Weight per RollUse And Craftwork
(oz. per sq/ft)(grams per sq/m)(inch)(mm)(%)(%)(lb)(kg)
EMS-P0.98/1.25/1.47300/380/45041-1021040-26002-8≤0.26630Pultrusion / Winding
EMS-R0.74/0.98/1.47/2225/300/450/60041-1021040-26002-5≤0.26630RTM / Automotive Parts
EMS-E0.98/1.47/2300/450/60041-1021040-26002-5≤0.26630Insulatin Material / Automotive Parts
EMS-M0.98/1.25/1.47300/380/45041-1021040-26002-6≤0.26630Compression Molding
EMS-O0.98/1.25/1.47300/380/45041-1021040-26002-5≤0.26630Common Type for RTM
Compress Molding And Automotive Parts


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours