Fiberglass E Glass Stitched Adhesive Pads for Fiberglass Boats and Pipes

Brief introduction: The stitched mat is made of chopped strand which randomly dispersed and be stitched together by polyester thread. Feature:Even thickness, high wet tensile strength retentionDirectional properties and strengths same to woven rovingEnough hollows on surface to make it good permeabilityFlexibility to d

Featured Products

Fiberglass E-Glass Stitched Bonded Mat for FRP Boat and PipeBrief introduction: 

The stitched mat is made of chopped strand which randomly dispersed and be stitched together by polyester thread.
 
Feature:
Even thickness, high wet tensile strength retention
Directional properties and strengths same to woven roving
Enough hollows on surface to make it good permeability
Flexibility to design variety weaving structures
Stable structure required to achieve maximum tensile strength properties

Data Sheet:
 
Specification Density(g/m2)Chopping layer density g/m2Width mm
ENC2502502501200-2600
ENC3003003001200~2600
ENC3503503501200-2600
ENC3803803801200~2600
ENC4004004001200-2600
ENC4504504501200~2600
ENC6006006001200~2600

Package & Storage:
stitch mat should be reserved indoor with drying, cool condition. It suggests that better to keep the package closed in order to prevent it from the wet.
 
Products package and storage, transportation
Stitch mat will be wrapped up paper pipe of 77mm inner diameter, and polyvinyl chloride film will be used for packing and sealing and then package them with carton.the mats should be put horizontally 12 and vertically 6 cartons every pallet.height of the pallet's heap should be within the two layers of the pallet's height.height of the carton heap should be within three layers of the carton.

 

Fiberglass E-Glass Stitched Bonded Mat for FRP Boat and PipeFiberglass E-Glass Stitched Bonded Mat for FRP Boat and PipeFiberglass E-Glass Stitched Bonded Mat for FRP Boat and Pipe

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours