Chemical Industry Corrosion Resistant Flexible Design FRP Panel

FRP Sandwich Panel1.Product IntroductionFRP panel is a new kind of high-quality environmental-friendly product,which is made of heat-cured gel coat, synthetic resin and fiberglass. And it\'s widely used in high-grade automobiles, refrigerator truck compartments and purification, medical treatment, food hygiene,food processing fa

Featured Products

FRP Sandwich Panel
1.Product Introduction
FRP panel is a new kind of high-quality environmental-friendly product,which is made of heat-cured gel coat, synthetic resin and fiberglass. And it's widely used in high-grade automobiles, refrigerator truck compartments and purification, medical treatment, food hygiene,food processing facilities, restaurants, commercial buildings and wash facilities and other projects.

2.Product Merits
  • Corrosion-resistant - Won't rot, rust or corrode.
  • High strength yet light weight - Helps save on transportation.
  • Fire-retardant and nonconductive - Helps create a safer environment.
  • Dimensional Stability - Won't shrink, swell, warp or bow.
  • Maintenance free - Durable and weather-resistant for a longer life cycle.
  • Easy to fabricate and install - Can be cut, drilled and assembled with standard tools.
  • Easy to clean - totally washable as it is completely rust & corrosion-proof.
  • Non-leaching - Does not require environmentally hazardous preservatives.
3.Applications
  • Construction industry - interior and exterior wall panels, partitions, pedals, cold storage, door panels, etc.
  • RV industry - roof, side wall panels, floor panels and door panels.
  • Transport vehicles - liners, roof panels, composite wall panels and laminate flooring.
  • Instruments and equipment - solar backplane, solar power plant, oil tank, etc.
  • Advertising media - billboards, shelves, signage. 

Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry



4.Attributes
 
A1 FireproofRelease no toxic gas when burning
Moisture resistantNo mildew and soften in wet condition
High strengthBending strength 12mm>20-30 Mpa
DurableTested to BS EN 12467 category A for exterior sheathing
Dimension stableDimension changes <0.3% in exterior wall
Waterproof coatingWater absorption speed is 1/5 of normal mgo or fiber cement board
Screw HoldingScrew pull out strength close to OSB,12mm>800N
Chloride freeno corrode metal and screw, do not damp the wall
Easy cutCould be cut by Utility Knife


5.Kinds
We have the following products:

1.FRP Honeycomb Sandwich Panel
This FRP honeycomb sandwich panel is used for wall decorating. It is smooth and with high strength, light in weight, easy to maintain. This panel is with good waterproof characterictic.

Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry

2.Polyurethane Foam Sandwich Panel
FRP sheet is an important kind of engineering wall-facing material at present. It solves the defects of traditional wall- face materials, such as difficult to clear, easy to deform, difficult to be installed, poor durability and poor impact performance.

Features and performance:
Weather resistance: FRP is a kind of thermosetting high polymer with good thermal stability. Its work temperature range is between -70 centigrade to 100 centigrade. Shock resistance: FRP sheet contains interlaced glass fiber, which increases the shock resistance greatly and avoids fracture under collision of stones and hails.

Corrosion resistance: The outside surface has a layer of high quality gel coat, which gives the product a good chemical stability to stand the corrosion of atmosphere, water and ordinary acid, alkaline and salt. So that it is very suitable to be used in placesnear the sea or areas with
corrosion. Fire retardant performance: The fire retaedant index of FRP sheet conforms to the national standard B2 level.


Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry


3.FRP EPS Sandwich Sheet
Our FRP EPS sandwich sheet is used in the building field. The surface is smooth and nice, light in weight, easy to maintain. It has the following characteristics: Waterproof, high strength, impact resistance, anti-corrosion and fire- retardant.

Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry

4.FRP Wood Sandwich Sheet
Our FRP wood sandwich sheet has good waterproof and anti-corrosioncharacteristics. The coefficient of heat conductivity is 0.32W/M2, the coefficient of sound insulation is above 50dB.

Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry

5.FRP XPS Sandwich Panel
FRP XPS Sandwich panel is used for building field, it has good thermal insulation feature.
Features and performance: Weather resistance: FRP is a kind of thermosetting high polymer with good thermal stability. Its work temperature range is between -70 centigrade to 100 centigrade. Shock resistance: FRP sheet contains interlaced glass fiber, which increases the shock resistance greatly and avoids fracture under collision of stones and hails.

Corrosion resistance: The outside surface has a layer of high quality gel coat, which gives the product a good chemical stability to stand the corrosion of atmosphere, water and ordinary acid, alkaline and salt. So that it is very suitable to be used in placesnear the sea or areas with corrosion.

Fire retardant performance: The fire retaedant index of FRP sheet conforms
to the national standard B2 level.


Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry

6.Company Profile

Hebei Yukuo FRP Manufacturing Co., Ltd always regards product quality as the foundation of enterprise development. Over the years, our company has carried out scientific and standardized management in strict accordance with the modern enterprise model. According to the customers feedbacks and based on global market we have set up a series of services and tactics. Based on science and technology, we have innovated varied products and achieved domestic and worldwide fame. The company has perfect testing equipments, strong technical support, providing customers with quality services. Our products are sold all over the world, and deeply trusted by users!

The main products includes: FRP container, FRP tower, FRP pipe, FRP cooling tower, FRP fan, FRP grating, FRP profile, FRP cable tray, FRP square water tank, etc. The company has 10 automatic production lines for pipe winding (can produce 5000m3 diameter 50mm-4500mm, pressure ≤ 6MPa pipe series products); 15 container production lines (can produce 1000mm-10000mm FRP container products); 5 sets of large-scale winding equipment on site, can produce 5000m3 Large-scale storage tank with a diameter of 25m; 10 production lines for tray; More than 80 sets of professional equipment for cooling towers.

Our customer service tenet is to continuously meet the needs of customers, provide best services and optimal solutions to customers which include the service idea of full decent cooperation. The ultimate purpose is to achieve the win-win situation.

Yukuo will continue to work hard, forge ahead, and strive for every cooperation with our strict quality and thoughtful service.


7.Certifications

Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry


8.Packing & Delivery

Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry
Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry



9.FAQ


Factory Outlet Corrosion Resistant Flexible Design FRP Panel for Chemical Industry
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours